By Tojo10 min read
Walk into any tailor shop and the first thing that separates one blazer from another is the collar. It shapes the whole look of the jacket, from how sharp it feels to how formal it reads. If you are trying to name the types of blazer collar you keep seeing, or pick the right one for your wardrobe or your next collection, you are in the right place.
Here is the short answer. Most blazers use one of three core styles, the same suit collar types you see on suits: notch, peak, or shawl. Notch is the everyday choice for business and casual wear. Peak is bolder and more formal. Shawl is a smooth, rounded collar that belongs on tuxedos and evening jackets. The same men blazer collar types apply to women's blazers, with small changes in proportion and width.
Below, you get six collar and lapel styles, each with its name, how it differs from the others, and when to wear it. We build suit, tuxedo, and blazer mockups at ShirtsMockup, so we handle these details daily. We also point out what designers should watch when drawing each lapel on a garment.
1. Notch lapel blazer collar
Start here, because the notch is the collar you will meet most often. It is the standard on business suits and sport coats, and every other style gets measured against it.

What it looks like
The notch lapel is built from two pieces, the collar and the lapel, joined by a seam. Where they meet, they leave a small triangular step, or notch, usually at an angle of about 75 to 90 degrees. The lapel edge runs straight and points slightly outward, never up. That makes it the most understated of all the types of blazer collar in this guide.
- Collar and lapel meet at a stepped notch
- Lapel edge points outward, not upward
- Typical width is 3 to 3.5 inches on a standard cut
Best occasions and blazer styles
Wear it to the office, client meetings, dinners, and any event with a daytime dress code. Single-breasted blazers in wool, cotton, or linen are where the notch looks best. It is relaxed enough to pair with jeans and sharp enough to carry a tie.
The notch lapel is the most versatile blazer collar, and also the least formal of the big three.
Skip it for black tie. A tuxedo with a notch lapel looks like a regular suit that tried too hard, so save it for business and smart casual wear.
Men's and women's variations
Men's notch lapels sit on a structured chest, and width follows the cut. Classic jackets run 3 to 3.5 inches. Slim cuts drop to around 2.5 inches. Among men blazer collar types, this is the one you can wear on almost any jacket without a second thought.
Women's blazers use the same shape with different proportions. The gorge, which is the seam where collar meets lapel, often sits a bit lower, and the lapel can be narrower. If you draw this collar or build it on a notch lapel blazer mockup, keep the collar and lapel on separate layers, so a fabric or pattern change follows the seam cleanly.
2. Peak lapel blazer collar
Of all the types of blazer collar, the peak has the most attitude. It is the boldest of the three core styles, and it reads as formal at first glance.

What it looks like
On a peak lapel, the edge points upward past the collar seam, ending in a sharp spike aimed at the shoulder. That upward line widens the chest visually and gives the jacket a strong, V-shaped frame.
- Lapel tip points up toward the shoulder
- Typically 3.5 to 4 inches wide
- Most common on double-breasted jackets and formal suits
Best occasions and blazer styles
Weddings, formal dinners, and evening events are where the peak belongs, whether on a blazer or a peak lapel suit. It is the classic partner of double-breasted jackets, and it works on single-breasted suits too when you want to stand out.
A peak lapel makes a blazer look dressed up, even when the fabric is simple.
Skip it for relaxed settings. On a linen blazer or casual sport coat, the sharp tips can look overdressed.
Men's and women's variations
Men's peak lapels run wide and sit on a structured shoulder, which suits broad, tailored cuts. Women's versions are usually a little narrower, and you see them most on power suits and evening blazers, where the sharp line adds polish.
Designers should give the lapel tip its own layer. That keeps the point crisp when you swap fabrics, and the shadow under the tip stays believable at any color.
3. Shawl lapel blazer collar
Now for the softest of the three. The shawl is the collar of tuxedos and dinner jackets, and among all the types of blazer collar it is the one built from a single continuous curve.

What it looks like
A shawl lapel has no notch and no point. The collar and lapel are cut as one unbroken, rounded piece that wraps from the back of the neck down to the button. The edge is often faced in satin, grosgrain, or velvet, which adds a contrasting sheen against the wool body.
- Smooth curve with no notch and no peak
- Usually 3 to 4 inches wide
- Often faced in satin or velvet
Best occasions and blazer styles
Black tie, galas, cocktail parties, and holiday dinners are where it belongs. Pair it with a tuxedo or a velvet dinner jacket, and you are dressed for the evening.
A shawl lapel is the fastest way to make a jacket read as evening wear.
Avoid it for daily office wear. On a plain business blazer, the rounded collar can look like a costume piece, and it clashes with a standard tie and a daytime dress code.
Men's and women's variations
Men's shawl collars appear mostly on single-breasted tuxedos with one or two buttons. Women's versions turn up on tuxedo-style blazers and wrap jackets, often with a softer roll and a slightly narrower width.
For shawl lapel tuxedo mockups, put the facing on its own layer. Then you can switch from satin to velvet without redrawing the collar, and the highlight along the curve stays realistic in every color.
4. Mandarin (stand-up) blazer collar
Next comes the collar with no lapel at all. Among the types of blazer collar in this guide, the mandarin is the one that skips the fold-over entirely, and it gives a jacket a modern edge that notch, peak, and shawl cannot match.
What it looks like
A mandarin collar rises straight from the neckline as a narrow upright band, usually 1 to 1.5 inches tall. It does not fold down, and the front edges meet at or near the center. With no lapel to break the line, the front stays clean and vertical.
- Upright band with no fold-over
- About 1 to 1.5 inches high
- No lapel, no notch, no peak
Best occasions and blazer styles
Think creative offices, gallery openings, modern weddings, and travel. It suits slim, single-breasted blazers in linen, cotton, or lightweight wool, and it looks good over a plain tee or a fitted knit.
A mandarin collar trades tradition for a sleek, tie-free look.
Traditional offices are the wrong fit. Without a lapel, the jacket cannot frame a tie, so it feels out of place in conservative business settings and at black tie events.
Men's and women's variations
Men's mandarin blazers lean toward minimal, slim cuts, often with hidden buttons for a cleaner front. Women's versions appear on cropped jackets and tailored separates, sometimes with a softer, slightly lower band.
For mockups, build the band on its own layer. Then you can change fabric or add contrast piping without touching the body of the jacket.
5. Collarless (cardigan-style) blazer neckline
Strictly speaking, this is not a collar at all. Still, it sits beside every other one of the types of blazer collar on the rack, and shoppers ask about it constantly. The cardigan-style neckline is the cleanest, most minimal option in this guide.
What it looks like
Collarless blazers have no collar and no lapel. The neckline is a plain round or shallow V cut, finished with a thin edge or facing, and the fronts often meet edge to edge with one button or none.
- Round or shallow V neckline
- Edge-to-edge or single-button front
- Often unlined or lightly structured
Best occasions and blazer styles
Relaxed settings suit it, such as weekend brunch, travel, and casual Fridays. Look for it in bouclé, jersey, or lightweight knit blazers worn over a tee or camisole.
The collarless blazer is the easiest layer to throw on and the hardest to make look formal.
Avoid it for tie-and-shirt dress codes. With no lapel, there is nothing to frame a shirt collar, so the jacket reads as casual outerwear rather than tailoring.
Men's and women's variations
Women's versions are the classic form, and they define the boxy bouclé jacket you see in many fashion collections. Men's versions are rarer and lean toward unstructured cuts in cotton or wool blends.
For mockups, put the neckline facing on its own layer. Then you can add contrast trim or switch fabrics without redrawing the front of the jacket.
6. Double-breasted and wide-lapel blazer collar
Last, we cover a style defined by proportion more than shape. A double-breasted front pushes the lapel wider, so this is the statement version of the collars above, and it earns its place among the types of blazer collar worth knowing.
What it looks like
A double-breasted jacket has a wide overlapping front with two columns of buttons, usually four or six. The lapels run 3.5 to 4.5 inches wide and are most often peaked, though notch versions exist. The extra cloth makes the chest look broader and the waist look narrower.
- Overlapping front with two button columns
- Lapel width of 3.5 to 4.5 inches
- Usually peak, sometimes notch
Best occasions and blazer styles
Reach for it at weddings, dinners, and any event where you want to stand out among single-breasted jackets. A peak-lapel double-breasted blazer in navy or gray wool is the classic. Button it when you stand.
A wide-lapel double-breasted blazer looks confident and formal, but only when the fit is right.
Be careful with loose cuts. Extra fabric makes shorter frames look boxy, and a notch-lapel version works better for smart casual outfits.
Men's and women's variations
Of all the men blazer collar types, this one depends most on tailoring. Men's versions keep a strong shoulder and a long, wide lapel, often with a 6x2 button layout.
Women's double-breasted blazers come cropped, belted, or longer and oversized, usually with a slightly narrower lapel. For double-breasted jacket mockups, put the button columns and the overlap shadow on separate layers. Then you can change fabric or button color without disturbing the lapel.
Choosing the right collar for your blazer
Pick the collar by occasion first, then by fit. Notch is the safe daily choice for the office and smart casual wear, peak adds formality, and shawl belongs to black tie and evening. Mandarin, collarless, and wide-lapel double-breasted jackets are the modern and statement options. Once you know the types of blazer collar by sight, you can read any jacket in seconds, whether it is cut for men or women.
Designers and sellers have one more step. A clean render with a clearly shaped lapel tells shoppers exactly what they are buying, and it saves you a photo shoot. You can test fabrics, patterns, and linings on a peak lapel blazer mockup in a few clicks, with the lapel and collar on separate, editable layers so every change stays sharp.
Comments
No comments yet. Start the conversation.